Hi everyone! We're hard at work trying to keep our community clean, so if you see any spam, please report it here and we'll review ASAP! Thanks a million!
The Ford XY Falcon GT is an Australian built muscle car based on the Ford XY Falcon. Released in 1970 with the GTHO Phase III released in 1971.
1,557 units were produced from September 1970 to December 1971 with 300 GTHO Phase III's produced from May 1971 to November 1971.
It was the fourth in the initial series of Ford Falcon GT muscle cars. A limited number were exported to South Africa, wearing Fairmont GT badging.
This model is starting to increase in value as genuine GT's become harder to find.
With the rev limiter disabled it was capable of 250 kilometres per hour (160 mph) and would pull 7,000+ rpm in 4th gear. The rev limiter was set to 6,150 rpm.
• Engine Specifications:
• Engine: 351 cubic inch Cleveland V8 (5.763 litre) • Bore & Stroke: 102 x 89mm (4.00 x 3.50in) • Power (DIN): 224kW (300bhp) @ 5400rpm • Torque (DIN): 515Nm (380lb-ft) @ 3400rpm • Compression Ratio: 11:1
• Rear Axle: Type: 9in LSD Traction Lock is standard with 28 spline axles or 31 spline optional
• Manual Ratio: 3.0:1 standard with optional 3.5:1 or 3.91:1
• Automatic Ratio: 2.75:1
• Suspension:
Front: Independent ball joint, coil springs, shock absorbers, wishbones and anti-roll bar Upper control arm to accept the 3 pin ball joint used, as opposed to the 4 point ball joint used in the normal GTs and earlier GTHOs
• Rear: Hotchkiss type with semi-elliptic leaf springs, shock absorbers and live axle
woody2858
Uploaded by woody2858 on
.
1971 Ford Falcon XY 351 GT - HO Phase III - Desktop Nexus CarsDownload free wallpapers and background images: 1971 Ford Falcon XY 351 GT - HO Phase III. Desktop Nexus Cars background ID 1667808. The Ford XY Falcon GT is an Australian built muscle car based on the Ford XY Falcon. Released in 1970 with the GTHO Phase III released in 1971.
1,557 units were produced from September 1970 to December 1971 with 300 GTHO Phase III's produced from May 1971 to November 1971.
It was the fourth in the initial series of Ford Falcon GT muscle cars. A limited number were exported to South Africa, wearing Fairmont GT badging.
This model is starting to increase in value as genuine GT's become harder to find.
With the rev limiter disabled it was capable of 250 kilometres per hour (160 mph) and would pull 7,000+ rpm in 4th gear. The rev limiter was set to 6,150 rpm.
• Engine Specifications:
• Engine: 351 cubic inch Cleveland V8 (5.763 litre) • Bore & Stroke: 102 x 89mm (4.00 x 3.50in) • Power (DIN): 224kW (300bhp) @ 5400rpm • Torque (DIN): 515Nm (380lb-ft) @ 3400rpm • Compression Ratio: 11:1
• Rear Axle: Type: 9in LSD Traction Lock is standard with 28 spline axles or 31 spline optional
• Manual Ratio: 3.0:1 standard with optional 3.5:1 or 3.91:1
• Automatic Ratio: 2.75:1
• Suspension:
Front: Independent ball joint, coil springs, shock absorbers, wishbones and anti-roll bar Upper control arm to accept the 3 pin ball joint used, as opposed to the 4 point ball joint used in the normal GTs and earlier GTHOs
• Rear: Hotchkiss type with semi-elliptic leaf springs, shock absorbers and live axle
Total Downloads: 264
Times Favorited: 0
Uploaded By: woody2858
Date Uploaded: January 25, 2014
Filename: Ford-Falcon-GT-HO-1.jpg
Original Resolution: 1276x824
File Size: 194.71KB
Category: Ford